To change the crimp spec offset manually, press the “
offset
”
field. Enter the desired offset using the keypad. Hit the
ENT
button to save and close window.
Offset Verification
Once the offset has been verified, select the box next to Offset
and a green checkmark will appear. This indicates that the offset
has been verified.
Note - If unable to select the checkbox, the Administrator
has not enabled this Offset Verification privilege for
the Non-Admin user.
Changing crimp offset manually
A. Press “Offset” field
Type in desired offset
B. Hit ENT to save and close the window
Note: This function overwrites the offsets
determined via the calculator
