6
GREEN MOTION DC 44/66 EV CHARGER INSTALLATION MANUAL
MN192006EN March 2023 www.eaton.com
00 Title
2.4 Electromagnetic fields and interference
2.5 Warning decals and rating plate
Electromagnetic fields may have harmful effects (unknown to date) on the health of people who are
subjected to long exposure. Avoid standing less than 20 cm from the equipment for long periods of time.
The labels on the equipment must NOT be removed, damaged, soiled or hidden.
The labels must always be visible and in good condition.
The technical data shown in this manual do not replace those shown on the data plates on the equipment.
National standards related to grounding must be complied with.
Connect the unit’s external frame or other conductive parts to ground to ensure system protection and the
highest level of safety for the operators.
The professional and qualified personnel must be an expert in the field, and are therefore responsible
for commissioning the system in accordance with the manufacturer’s instructions and local legislation. If
electromagnetic interference is detected, the professional and qualified personnel should contact an Eaton
technical support representative using the email address bgtechsupport@eaton.com
2.6 Residual risks
Table 3. Residual risks
Risk assessment
Recommended solution
Noise pollution caused by installations in unsuitable environments or
where professionals work on a regular basis.
Reassess the installation environment or site.
Unsuitable ventilation in the location, causing equipment to overheat,
leading to discomfort for people who are on the site.
Restore adequate ambient conditions and ventilate the site.
Protection from the elements, such as water ingress, low temperatures,
high humidity, etc.
Maintain adequate ambient conditions for the equipment.
Surface temperature is high.
Do not obstruct openings on the equipment. Use suitable PPE or
wait for the equipment to cool down before accessing it.
Dirt affects the system and prevents the safety labels from being read.
Adequately clean the equipment, the labels and the workplace.
Poor installation.
Request a training course.
During the installation stage, provisionally fixing the equipment or
its components can be hazardous.
Take care and restrict access to the installation area.
Accidentally disconnecting the quick connectors while the equipment is
operational or making incorrect connections can produce electrical arcs.
Take care and restrict access to the installation area.
Despite the cautions and safety systems in place, some residual risks will still be present, which cannot be
removed. These risks are listed in the following table, along with recommendations to prevent or mitigate them.
