background image

INS #

Brand Logo  

reversed out of 

black

INS #

IB517029ML

    HALO Commercial 

Risk of Fire, Electrical Shock, Cuts or other Casualty Hazards- Installation and maintenance of this 

product must be performed by a qualified electrician. This product must be installed in accordance 

with the applicable installation code by a person familiar with the construction and operation of 

the product and hazards involved. 

Risk of Fire and Electric Shock- Make certain power is OFF before starting installation or 

attempting any maintenance. Disconnect power at fuse or circuit breaker.

Risk of Fire- Minimum 90°C supply conductors.

Risk of Burn- Disconnect power and allow fixture to cool before handling or servicing.

Risk of Personal Injury- Due to sharp edges, handle with care.

Failure to comply with these instructions may result in death, serious bodily injury and property 

damage.

WARNING

DISCLAIMER OF LIABILITY: Eaton assumes no liability for damages or losses of any kind that may arise from the 

improper, careless, or negligent installation, handling or use of this product. 

 

IMPORTANT:

 Read carefully before installing fixture. Retain for future reference. 

NOTICE:

 Fixture may become damaged and/or unstable if not installed properly.

Note:

 Specifications and dimensions subject to change without notice.

Note:

 This fixture should be supported by main runners or other structure that is capable of supporting fixture 

weight of 40 Ibs. 

ATTENTION Receiving Department:

 Note actual fixture description of any shortage or noticeable damage on 

delivery receipt. File claim for common carrier (LTL) directly with carrier. Claims for concealed damage must be 

filed within 15 days of delivery. All damaged material, complete with original packing must be retained.

Wiring Diagrams and Instructions – HCC4, HCC6, HCC8 & 

Commercial LED Rough-In 

Schéma et instructions de câblage – Luminaire DEL à montage sur 

gobetis HCC4, HCC6, HCC8 et commercial 

Diagramas de cableado e instrucciones: HCC4, HCC6, HCC8 y 

Rough-In para LED de uso comercial

Surface Mounts

HCC8S

HCC4W

HCC6S

HCC6W

HCC4S

HCC8W

Wall Mounts

Outer Diameter

Height

HCC4

6-7/8"

10-3/4"

HCC6

8-3/16"

12-1/8"

HCC8

10-1/4"

16"

Summary of Contents for HALO Commercial HCC6














Reviews: