Page 9
SK-90610-Y4_EN
ENGLISH
3. Installation
3.1 Inspecting the equipment
If any equipment has been damaged during shipment, keep the shipping cartons and packing materials
for the carrier or place of purchase and file a claim for shipping damage. If you discover damage after
acceptance, file a claim for concealed damage.
To file a claim for shipping damage or concealed damage:
1) File with the carrier within 15 days of receipt of the equipment;
2) Send a copy of the damage claim within 15 days to your service representative.
3.2 Unpacking the MBP
Unpack the equipment and remove all the packing materials and shipping carton.
Discard or recycle the packaging in a responsible manner, or store it for future use.
Place the cabinet in a protected area that has adequate airflow and is free of humidity, flammable gas,
and corrosion.
Packing materials must be disposed of in compliance with all local regulations concerning waste.
Recycling symbols are printed on the packing materials to facilitate sorting.
3.3 Checking the accessory kit
p
Verify that the following additional items are included with the MBP:
MBP6K208
1
2
5
3
6
4
(1)
Input/Output UPS cord set
(2)
(2) cable glands
(3)
Rack kit for 19-inch enclosures
(4)
Fixation kit for Rack mounting
(including square nuts ans
screws)
(5)
Tower and wall mouting kit
(including 2 ears and screws)
(6)
Installation and user manual
MBP11K208
1
2
3
4
6
9
8
7
5
(1)
MBP I/O cover
(2)
MBP I/O "UPS connection" cover
(3)
(2) conduits with internal wires
for UPS Input/Output connection
(4)
(4) conduit fittings
(5)
Fixation kit for MBP I/O covers
(including screws)
(6)
Rack kit for 19-inch enclosures
(7)
Fixation kit for Rack mounting
(including square nuts and
screws)
(8)
Tower and wall mounting kit
(including 2 ears and screws)
(9)
Installation and User manual
