IQ 100 Series ((130/140/150) Meter
Programming the IQ 100 Series Meter Using Software
User and Installation Manual IM02601003E - July 2010 www.eaton.com 68
Using the Options Screen
1. Click View>Options. You will see the screen shown on
the right. Use this screen to access the following
features:
• Paths for Eaton Meter Configuration Software files
• Data Scan Mode
Use the tabs at the top of the screen to access these
features.
2. The first Options screen is the Paths screen, shown on
the right. Use this screen to view or change the paths
the Eaton Meter Configuration Software uses for data.
3. Click the Data Scan Mode tab to see the second screen
on the right. Use this screen to select Normal Scan rate
or to enter a custom Scan rate.
4. Click:
• Apply to apply your selection(s) and keep the
Options screen open.
• Okay to apply your selection and close the
Options screen.
• Cancel to close the Options screen without
saving any selections that have not been applied
(using the Apply button).
Using the Help Menu
The Help menu, accessed by clicking Help in the Title Bar, allows you to:
• View this manual online: click Help>User Manual.
• View information about the Eaton Meter Configuration Software, including version number: click
Help>About Eaton Meter Configuration Software.
