Page
7
address of the keypad. Each keypad
must have a unique address (1 to 4).
Buzzer Volume
This option sets the volume of all
tones that originate from the keypad,
such as key and proximity reader
beeps and address request tones. The
keypad buzzer volume setting in the
control unit (
I
nstaller menu, Detectors/
Devices, Wired Keypads, Edit Keypad)
sets the volume of all tones that
originate from the control unit (such
as entry/exit tones).
Maintenance
The only maintenance required is
cleaning and an annual test of the
keypad using the Test menu at the
control unit.
Clean the outside of the case using
a soft dry cloth. Do not use water,
solvents or any proprietary cleaning
agents.
Specifications
Supply Voltage: 12Vdc.
Current Consumption: 65mA max with
backlight on, and external proximity
reader connected. 25mA max
with backlight off, and no external
proximity reader.
Output: Open collector, 12Vdc when
active, 0V when active, 250mA max,
fuse protected.
Panel Software: 4.04 or later.
Weight: 0.2kg.
Dimensions: 132mm (h) x 142mm (w)
x 13mm (d).
Operating Temp. Range: -10°C to
+55°C.
Max Relative Humidity: 95%,
non-condensing.
Case Material: ABS.
Intrusion Standards: EN50131-3:2009
Grade 3. PD6662:2010.
Environmental Class: Class II.
EU Compliance Standards: R&TTE:
1999/5/EC, EMC: 2004/108/EC, RoHS:
2011/65/EC, WEEE: 2012/19/EC, EUP:
2005/32/EC, Low voltage: 2006/95/EC,
General safety: 2001/95/EC.
This product must be installed by
qualified service personnel.
