Parameters
120
M-Max Series Adjustable Frequency Drive
MN04020003E—October 2013 www.eaton.com
Logic Function, continued
PNU
ID
Access
RUN
Value/Range
Description
Factory Setting
(P1.3)
24
LOG function fulfilled
Message if the logical operation of P13.3 is fulfilled (LOG = 1)
25
PID controller, actual value monitoring
Message if the actual value is within the hysteresis set at P9.15
and P9.16
26
External brake actuated
Switch threshold: set value of P12.8
27
Current monitoring
Switch threshold: set value of P5.8
28
Fieldbus, Remote output
The number of the assigned digital output is written directly to
the control word (ID2001, bit 13)
P13.2
1454
X
—
LOG function, Selection input B
0
Like P13.1
—
P13.3
1455
X
—
LOG function, select operation
0
Logical operation (LOG) of the selected functions of
parameter P13.1 (A) and P13.2 (B)
0
A AND B
1
A OR B
2
A XOR B, exclusive A or B
Signal
Logic Link (LOG)
XOR
(Exclusive or)
A
B
AND
OR
0
0
0
0
0
0
1
0
1
1
1
0
0
1
1
1
1
1
1
0
The result of the logic operation (LOG) can be assigned to one
of the three digital outputs (DO = P5.3), RO1 = P5.1 and
RO2 = P5.2 with the value 24, or called via the serial interface
(RS485, Modbus RTU) or an optional fieldbus connection
(CANopen, PROFIBUS DP)