Eaton
1000 Eaton Boulevard
Cleveland, OH 44122
United States
Eaton .com
© 2023 Eaton
All Rights Reserved
Printed in USA
Publication No . IB013003ENH02 / TBG 001623
June 2023
Eaton is a registered trademark.
All other trademarks are property
of their respective owners.
Instructions for installation, operation,
and maintenance of Magnum MR2
(integral racking)
Instructional Booklet
IB013003EN
Effective June 2023
Disclaimer of warranties and limitation of liability
This instruction booklet is published solely for information purposes
and should not be considered all-inclusive . If further information is
required, you should consult an authorized Eaton sales representative .
The sale of the product shown in this literature is subject to the
terms and conditions outlined in appropriate Eaton selling policies
or other contractual agreement between the parties . This literature
is not intended to and does not enlarge or add to any such contract .
The sole source governing the rights and remedies of any purchaser
of this equipment is the contract between the purchaser and Eaton .
NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING
WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE
OR MERCHANTABILITY, OR WARRANTIES ARISING FROM
THE COURSE OF DEALING OR USAGE OF TRADE, ARE MADE
REGARDING THE INFORMATION, RECOMMENDATIONS, AND
DESCRIPTIONS CONTAINED HEREIN.
In no event will Eaton be responsible to the purchaser or user in
contract, in tort (including negligence), strict liability or otherwise
for any special, indirect,incidental or consequential damage or loss
whatsoever, including but not limited to damage or loss of use of
equipment, plant or power system, cost of capital, loss of power,
additional expenses in the use of existing power facilities, or claims
against the purchaser or user by its customers resulting from the
use of the information, recommendations and description contained
herein .
