Operating instructions ResistTel IP4/IP162
03/22
56
1
Phone lock is off, phone can be used.
2
Phone lock is turned on, phone cannot be used.
Text:
[1] [2]
..................... Input parameters for the optional definition of labeling texts.
Icon:
[1] [2]
..................... Selection parameter for the optional definition of pictograms.
LED:
[2]
......................... Selection parameter for defining the LED operating mode in state 2
"Headset" function for selected key f
Function key f controls enabling/disabling or switching headset operation on/off.
Type:
Headset
. Selection parameter set to function type
Headset
.
State:
....................... Selection element for setting the function state
1
Headset locked or turned off
2
Headset released or powered on
Text:
[1] [2]
..................... Input parameters for the optional definition of labeling texts.
Icon:
[1] [2]
..................... Selection parameter for the optional definition of pictograms.
LED:
[2]
......................... Selection parameter for defining the LED operating mode in state 2
Mode:
......................... Selection parameter for determining how the function works
Enable
Function controls enabling and disabling of headset operation.
Control
Function controls switching the headset conversation mode on and off if
headset mode is enabled.
Function "Hotdesk" for selected key f
Function enables the flexible change from user 1 to a selectable co-user. To do this, press the f function
key, whereupon the dialog
Register
opens, in which the user who is to be registered and activated is
specified. By pressing the menu key , the selected co-user is then logged in, whose name/telephone
number displaces that of the previously active user in the header of the display. The next time the
function key f is pressed, the user changes in the opposite direction; the co-user's registration is deleted
and user 1 becomes an active user of the phone again.
Type:
Hotdesk
.. Selection parameter set to function type
Hotdesk
State:
....................... Selection element for setting the functional state
1
User 1 activated
2
Selected co-user activated
Text:
[1] [2]
..................... Input parameters for the optional definition of labeling texts.
Icon:
[1] [2]
..................... Selection parameter for the optional definition of pictograms.
LED:
[2]
......................... Selection parameter for defining the LED operating mode in state 2
Function "Create reg. " for selected key f
Function key f registers the user specified in the dialog and activates this if you set the
Activate
selec-
tion parameter to
On
.
Type:
Create reg.
Selection parameter set to function type
Create reg.
Text:
......................... Input parameters for the optional definition of labeling texts.
Icon:
......................... Selection parameter for the optional definition of pictograms.
Registration
.............. Open the dialog below to define the user registration
Protocol:
.................. Selection parameter for specifying the protocol to be used
