APPENDIX C: USING SNMP
EATON
Managed ePDU
t
User’s Guide
S
164201xxx Rev 1
DRAFT 10−OCT−2008
112
S
The SNMP MIBII sysLocation value in the
System Location
field.
S
The SNMP MIBII sysContact value in the
System Contact
field.
6.
Click the link at the bottom of the page to download an SNMP MIB for your
ePDU to use with your SNMP manager.
7.
Click
Apply
. The SNMP configuration is set.
Configuring Users for Encrypted SNMP v3
The SNMP v3 protocol allows for encrypted communication. To take advantage of
this, users need to have a Encryption Phrase, which acts as a shared secret between
them and the ePDU. This encryption phrase can be set in the User Management
page.
1.
Choose
User Management
, then
Users & Groups
. The User Management page
displays.
Figure 99. User Management Page
2.
Select the user profile you want to modify from the
Existing Users
list.
3.
If you want to use the user’s password as their Encryption Phrase select the
Use
Password as Encryption Phrase
check box if it not already selected.
4.
If you want to specify a different encryption phrase do the following:
Summary of Contents for Managed ePDU
