2
INstallatIoN MaNual
(25-13287-B) June 2020 www.eaton.com
Installers
Thank you for purchasing the Eaton
MC5-EN ceiling speaker. This product
was tested before shipment and
therefore should arrive in working
condition. If you have any issues with
this speaker, please contact your
supplier in the first instance.
Safety Information
CautIoN
WaRNING: Inappropriate use of this
speaker can result in property dam-
age, injury or death.
•
Please be sure to read the whole
installation manual
•
Please follow all recommendations of
this installation manual
•
We recommend you keep this manual
for future reference
If you have any concerns or questions
regarding the points raised in this
manual, please contact your supplier in
the first instance.
Please note:
•
The speaker is not waterproof and
is only designed for use inside a
building. Exposure to raise or other
water sources will result in damage to
the unit.
•
This unit is design to operate at 100v
AC. Please isolate the speaker cabling
from the source before conducting
any works within the unit
•
Ensure the speaker is correctly
installed into a firm recess. Failure to
do so may result in the speaker failing
and causing an injury or death
•
Ensure all terminations are fully
tightened to avoid short circuits
forming due to disconnected cables
•
Do not install speakers into
humid, dusty, smoky or steamy
environments; the speaker may be
damaged and not operate correctly
•
Do not use the fire dome as
junction box for other cables. Only
70V/100V loudspeaker lines should be
connected to this speaker
Installation
Step 1
Pull down the speaker grill from the red
fire dome. Disconnect the grill from the
fire dome by compressing the 2 spring
connections
Step 2
Remove as many knock-outs as required
and fit 20mm fire-rated glands. Install
the cable into the fire dome leaving
8”-10” of cable within the fire dome.
Summary of Contents for MC5-EN
Page 1: ...MC5 EN Installation Manual...
