Engineering
39
06/09 AWB2723-1613en
The terminals on the SmartWire-Darwin module for DILM are
suitable for cables AWG24 to AWG16 and flexible cables
with a cross-section of 0.25 mm
2
to 1.5 mm
2
.
When using ferrules it has to be ensured that the ferrule
length is at least 8 mm.
A manual or electrical ON or OFF command for the contactor
can take place in addition with the aid of the 1-0-A switch
i
in the device version DIL-SWD-32-002.
The switch positions are as follows:
• 1 = Contactor ON
• 0 = Contactor OFF
• A - switching command via SmartWire-Darwin
h
Caution!
The connection cables to the potential-free auxiliary
contacts at connection X0-X1-X2
g
for the potential-free
contacts and at connection X3-X4
h
for the auxiliary
contact enable may have a maximum length of 2.8 m.
h
Use of the 1-0-A switch for the electrical switching on or
off of the contactor is ensured only when the SmartWire-
Darwin module for DILM is supplied via the SmartWire-
Darwin connecting cable.
Summary of Contents for Moeller SmartWire-Darwin Series
