Eaton MTL831C, Instruction Manual

1

INM MTL831C Rev 7

CAUTIONARY NOTE: 

In common with all other electrical apparatus installed in hazardous areas,this apparatus must 
only be installed, operated and maintained by competent personnel. Such personnel shall have 
undergone training, which included instruction on the various types of protection and installation 
practices, the relevant rules and regulations, and on the general principles of area classification. 
Appropriate refresher training shall be given on a regular basis. [See clause 4.2 of EN 60079-17].
This instruction manual supplements the requirements of nationally accepted codes of practice, 
for example, IEC/EN 60079-14 in Europe. All installations should comply with the relevant 
sections of these codes.
In addition, particular industries or end users may have specific requirements relating to the 
safety of their installations, and these requirements should also be met.

1 

 ABOUT  THIS  MANUAL

The purpose of this manual is to provide the user with information on the installation, 
connection and configuration of the MTL831C/MTL831C-PS  Analog Transmitter.

1 .1 

Related documents

This manual does NOT cover the connection or configuration of the MTL838C 
receiver. For details of these items consult:

•  INM MTL838C 

Receiver Instruction Manual

•  INM MTL838C-MBT 

Receiver Instruction Manual

For IS installations the 

MTL5553 

Isolator/power supply will be required.  For details 

of these items consult:

•  INM MTL5500

 range manual (MTL5553)

Other related manuals:

•  EPS MTL830C 

Temperature Multiplexer system datasheet

•  EPS MTL830C-MBT 

Temperature Multiplexer system datasheet

•  INM MTL838C-MBF 

Modbus implementation manual

•  INM MTL83xC LLMUX 

PC SW Manual - LLMUX

•  INM MTL83xC Modbus 

PC SW Manual - Modbus

•  TSN MTL838C Modbus 

Introduction to Modbus support notes

MTL831C 
Analog Transmitter

Figure 1 .1

 -  MTL831C Analog Transmitter