Eaton Network-M2 User Manual Download | Manualshive

Page: 243 / 268

background image

CLI

Information – 243

CONTEXT SENSITIVE HELP
[?] - Display context sensitive help. This is either a list of possible
command completions with summaries, or the full syntax of the
current command. A subsequent repeat of

this

key, when a command

has been resolved, will display a detailed reference.

AUTO-COMPLETION
The following keys both perform auto-completion

for

the current command line.

If the command prefix is not unique then the bell will ring and a subsequent
repeat of the key will display possible completions.

[enter] - Auto-completes, syntax-checks then executes a command. If there is
a syntax error then offending part of the command line will be
highlighted and explained.

[space] - Auto-completes, or

if

the command is already resolved inserts a space.

MOVEMENT KEYS
[CTRL-A] - Move to the start of the line
[CTRL-E] - Move to the end of the line.
[up] - Move to the previous command line held in history.
[down] - Move to the next command line held in history.
[left] - Move the insertion point left one character.
[right] - Move the insertion point right one character.

DELETION KEYS
[CTRL-C] - Delete and abort the current line
[CTRL-D] - Delete the character to the right on the insertion point.
[CTRL-K] - Delete all the characters to the right of the insertion point.
[CTRL-U] - Delete the whole line.
[backspace] - Delete the character to the left of the insertion point.

ESCAPE SEQUENCES
!! - Substitute the last command line.
!N - Substitute the Nth command line (absolute as per

'history'

command)

!-N - Substitute the command line entered N lines before (relative)

7.7.3 get release info

7.7.3.1 Description

Displays certain basic information related to the firmware release.

7.7.3.2 Help

get_release_info
-d Get current release date
-s Get current release sha1
-t Get current release time
-v Get current release version number

«
...
241
242
243
244
245
...
»

Summary of Contents for Network-M2













































































































































































































































































Reviews:

No comments

Related manuals for Network-M2

Express5800/E120d-M

Brand: NEC Pages: 2

Brand: Panasonic Pages: 44

Brand: Panasonic Pages: 18

Brand: ZyXEL Communications Pages: 2

Brand: Dahua Pages: 24

Brand: Stephen Pages: 102

Brand: Davey Pages: 18

Brand: National Instruments Pages: 130

Brand: StarTech.com Pages: 9

Brand: Solwise Pages: 231

Brand: Connectland Pages: 10

netHOST NHST-T100

Brand: hilscher Pages: 75

Brand: Supero Pages: 54

Brand: Patton electronics Pages: 8

Brand: PACOM Pages: 16

Brand: Planet Pages: 67

Brand: Devolo Pages: 24

Brand: C&H Technologies Pages: 1

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands