www.eaton.com
Network
Management Card
(Network-MS)
User Manual
Network Management Card
– User Manual
34003991XT_EN/JC
Page
100/143
-----------------------------------------------------------------------------
EATON NETWORK MANAGEMENT CARD
LDAP settings
(1)
-----------------------------------------------------------------------------
*** About Primary Server ***
1 : Enable (0=No, 1=Yes) [1]
2 : Name [10.130.32.6]
(2)
3 : Port [389]
(2)
*** About Secondary Server ***
4 : Enable (0=No, 1=Yes) [0]
5 : Name []
(3)
6 : Port [389]
(3)
*** About binding ***
7 : Mechanism (SIMPLE, DIGEST-MD5) [SIMPLE]
8 : Search Mode (ANONYMOUS, USERBIND) [USERBIND]
9 : Search User Distinguished Name
10 : Search User Password [*****]
(4)
0 : Exit
-----------------------------------------------------------------------------
(1) Read-write or read-only according to “Authentication Method” status
(2) Read-write or read-only according to “
Enable
” status of the Primary Server
(3) Read-write or read-only according to “
Enable
” status of the Secondary Server
(4) Read-write or read-only according to “
Search Mode
” status
6.3.12 Return to default Login/Password
If the login or password is lost, select this option to enable the return to the default Login/Password.
6.3.13 Return to default configuration
This item is used to return to default configuration which is described in this document.
The NMC card is automatically restarted after returns to default configuration.
6.4 Command Line Interface
Command Line Interface (CLI) API provides functions for building and processing a user-defined HMI. To use the
CLI, the parameter “HMI type” has to be equal to “CLI”.
When opening a new session, TELNET or SSH, a specific prompt “#>” is sent to the client. The user can enter a
command. If the command is recognized, it is processed, else a warning message is sent to the client.
The syntax used is based on that already implemented for the XML description of objects. The blank character is
