Emergency On Call Service: Local representative (
) or +49 (0) 180 5 223822 (de, en)
3/3
01
/17 I
L01206
008Z
Eaton Industries GmbH, Hein-Moeller-Straße 7-11, 53115 Bonn, Germany
© 2008 by Eaton Industries GmbH,
01/17 IL01206008Z
DE05
Doku
NZM2-XHB-DA-OAG
Per the intent of
NFPA 79,
Electrical Standard for Industrial
Machinery, the Supplementary Handle enables the Supply
Circuit Disconnecting Means to remain operable at all times
by qualified persons, independent of the door position and
without the use of accessory tools or devices.
In addition, use of the handle to close the disconnecting means
is prevented when the door is open, unless an interlock is
operated by deliberate action.
Deliberate Action to close Disconnecting Means:
Turn handle clockwise appr. 20° as shown.
From this position, push the handle in to engage shaft,
then turn clockwise to ON to close switch.
To open Disconnecting Means:
Turn handle counter-clockwise from ON to OFF.
(No deliberate action necessary when going from ON to OFF).
11
1
2
TRIP
Z 2
1 Nm
(8.9 lb-in)
3
OFF
TRIP
RE
SET
1
TR
IP
OF
F
ON
2
4 - 8 mm
(0.16 - 0.32”)
OFF
TR
IP
ON
OF
F
3
1
2
Q
20°
TR
IP
OF
F
ON
Q
20°
1
Warning! Danger to Life!
Operation of the Supplementary Handle may cause
circuits inside panel to become energized and create
a potentially hazardous condition. Operation to be
carried out by
Qualified Persons
only!
