EATON
Installation & Maintenance Instructions
TM396 – XF-XP-XT LW UL ISS.A
11 |
P a g e
3.3
Accessory Installation
3.3.1 Sunshield Installation
Depending on the model required, sunshields can be supplied uninstalled to prevent damage during
shipping and unpacking. There is a protective plastic film that must be removed prior to installation. The
correct sunshield fixings, for each model, are supplied with the camera system and should be positioned as
detailed below.
To mount the sunshields, first they must be positioned correctly and fixed with a Nylon spacer between the
sunshield and the camera housing, the M5 A4 Button head screws supplied must have the red fiber washer
fitted before fixing the sunshield. (Fig 8 & 9)
Sunshields can have four equally sized fixings at each corner (Fig.8) or, have two corner and two ‘tab’ fixing
types, one for the front of the housing and shorter screws at the rear. (Fig.9)
Fig.8
Type A Sunshield Installation
Fig.9
Type B Sunshield Installation