EATON
Installation & Maintenance Instructions
TM396 – XF-XP-XT LW UL ISS.A
9 |
P a g e
Fig.3 BFW5000 Wall Bracket
Fig.4 BFP0600/900/1200 Column Spacer
3.2.2 Mounting the XF Series
The XF Series fixed housing assemblies may be mounted onto various structures such as bulkheads, walls or
towers. The units have a mounting plate on the bottom of the housing tube that have four (4) M6 Threaded
fixing points. (Fig 5)
The type and size of these fixings to be supplied by the user/installer and must be suitable for the specific
installation requirements.
To gain flexibility of the cameras view direction one of the EATON range of fixing brackets is needed. These
comprise of the BFP00SW Swivel joint (Fig 6), the BFW32SW (Fig 7) or a combination of the BFW5000 and
BFP00SW. (Figs 3 & 6)
Depending on Housing length, some wall brackets do not permit the camera to view directly away from the
Wall and must be rotated or tilted to allow room for gland entry.
