32
Eaton PDI WaveStar Infinity 2 Monitoring System Setup and Operation Manual P-164001106—Rev 01
–
Screensaver Time Out
: When there is no operator input for the specified period the Monitor loads
the screensaver. This parameter applies to both local and remote users.
–
Screen Time Out
: When there is no operator input for the specified period the screen goes blank, the
backlight turns off.
•
Check
Inline Calibration
to allow calibration directly from an analog measurement screen. See paragraph
for explanation.
•
Check
Subfeed Cascading
to allow subfeeds and panelboards to display as an overlapping cascade on the
HOME
screen 1-line mimic. When you have many subfeeds and/or panelboards, cascading allows their
icons to fit on the screen so that you do not have to scroll the HOME screen. See
•
Check
Zero Fault
which will monitor the current output and if one of the output’s current drops to Zero
after having a value, a fault will be listed. When this is checked an additional meter will be shown in the
alarm header. See
below.
Figure 20. GENERAL Screen, BASIC Tab, Zero Fault Alarm in Alarm Header
Zero Fault Alarm Monitor
•
LOAD DEFAULT
loads the parameters created in manufacturing and shipped with the unit.
Summary of Contents for PDI WaveStar Infinity 2
Page 4: ......
Page 78: ...P 16400110601 P 164001106 01...
