Eaton PDI WaveStar Infinity 2 Monitoring System Setup and Operation Manual P-164001106—Rev 01
51
C
Chhaapptteerr 66 O
Oppeerraattiioonn:: M
Moonniittoorriinngg YYoouurr S
Syysstteem
m
To view Infinity 2 screens, utilize the Infinity 2 Monitor on the monitored unit or access the Monitor remotely
from a browser. Remote users must enter the unit’s IP address into a browser. (Currently Google’s Chrome
browser is supported.) To view monitoring information, no login is necessary.
66..11
H
HO
OM
MEE S
Sccrreeeenn
When you power-on your unit or when a remote user connects to an Infinity 2 system, the first screen
displayed is the Infinity 2
HOME
screen. The
HOME
screen displays a dynamic 1-line showing the
configuration of your monitored unit with an at-a-glance status summary. By selecting elements on this screen,
a user can navigate to other screens to display monitoring information or to set system parameters. To select
screen elements:
•
On the Infinity 2 display, touch the screen element
•
On a remote browser, users select screen elements with their pointing device as they normally do.
Figure 38. HOME Screen
Display
SETUP
screens.
Select right
corner of banner
to Log in.
Active user is
displayed.
Display
HOME
screen.
Voltage Sensor
:
Select to display
Input
Voltage
Voltage and
Current Sensor
:
Select to display
Transformer
Output
Voltage
and
Current
Circuit breaker:
Open (red)
Closed (green).
CB is not
monitored (grey)
Transformer
temperature:
Green=OK.
Orange = High
temp
Red = Overtemp
:
Panelboard
Sensor Strips (S)
Select to display
Panel 1 status.
(S) color shows
status:
Green=OK.
Orange=Warnings
Red=Alarms
If Panel has no
(S), panelboard
has no CT sensor
strip.
Select to display the
ALARM
screen.
Green=OK.
Orange = Warnings present
Red = Alarms present
Display
SENSOR
STATUS
screen.
Select to
Display the
Log
Select to
Display the
Menu
Options
Summary of Contents for PDI WaveStar Infinity 2
Page 4: ......
Page 78: ...P 16400110601 P 164001106 01...
