Eaton PDI WaveStar Infinity 2 Monitoring System Setup and Operation Manual P-164001106—Rev 01
21
44..22..77
TTrraannssffoorrm
meerr S
Seennssoorr B
Booaarrdd
The Transformer Sensor Board monitors the transformer’s temperature status.
The temperature status is shown on the Home screen with one of the following color statuses:
•
Green = normal or temperature is within normal parameters
•
Orange = high temperature
•
Red = over-temperature
Figure 14. Transformer Sensor Board
44..22..88
M
Muullttiippllee O
Oppttiioonn B
Booaarrddss ooff tthhee S
Saam
mee TTyyppee
You may have more than one Option Board of the same type. For example, Digital Inputs are used for circuit
breaker aux contacts and on a PDU with many subfeeds you may have more than one Digital Inputs Option
Board.
When you have more than one Option Board of the same type, they are ordered in the Sensor List, Modbus
Points List, and SNMP MIB as follows:
1.
Sensor boards earlier in the Monitoring Compartment layout are listed first. (See paragraphs
, and
, as well as
, and
2.
Sensor Base Board layout: Options Boards are ordered by position number 1-4 on the Sensor Base Board
(See paragraph
Sensor Base Boards and Option Boards
, and
Summary of Contents for PDI WaveStar Infinity 2
Page 4: ......
Page 78: ...P 16400110601 P 164001106 01...
