22
Eaton PDI WaveStar Infinity 2 Monitoring System Setup and Operation Manual P-164001106—Rev 01
44..33
S
Seennssoorr B
Booaarrdd C
Coonnffiigguurraattiioonn
To list the sensor boards on your unit with their status, select the question mark symbol on any screen header (
). The software version, points list version, and error status are shown for all sensor boards. Software
levels are also shown for other components of the Infinity system.
Figure 15. Sensors’ Status List for a PDU
Stale
“No” = OK
“Yes” = Sensor
Board has not
updated staus
within a given
period.
Error
“None” = no errors
See table below for
list of errors and
their meanings
Sensor Board
List of sensor boards
in the system.
Sensor boards can be
renamed
on screen
with
the
NAMES
screen.
*Boards listed vary based
system configuration.*
SW Version
Software Version
and Modbus points
list version.
Table 1. Sensor Board Errors and Descriptions
Error Name
Description
Data Ready Error
Did not receive data from the ADC (Analog to Digital Converter).
Voltage Waveform Error
Did not receive voltage waveform data.
Math Completion Error
Did not complete the Math process needed to display data readings.
Strip Sync. Error
Did not receive the three sets of data readings from the CT strip sensor board.
Summary of Contents for PDI WaveStar Infinity 2
Page 4: ......
Page 78: ...P 16400110601 P 164001106 01...
