Eaton PDI WaveStar Infinity 2 Monitoring System Setup and Operation Manual P-164001106—Rev 01
31
55..22
S
Seettuupp:: G
GEEN
NEER
RA
ALL S
Sccrreeeenn
The
GENERAL
screen has two tabs:
•
BASIC
determines Infinity 2 screen and audible alarm behavior
•
DATE/TIME
sets date and time used on screens and for time-stamping events.
Select the
Setup
icon
in the banner, then select the
GENERAL
button. The display screen will show the
current display parameters. For default parameters select
LOAD DEFAULT
. Then adjust parameters as
necessary. Changes are automatically saved as you make them.
BASIC Tab:
Enter parameters for Monitor behavior.
Figure 19. GENERAL Screen, BASIC Tab
•
Audible Alarm: Check
Audio Alarm
if you want an audible alarm to sound at the Infinity 2 7" touchscreen
when there is a new alarm. Set
Volume
with drop down list. The Audible Alarm is for the local display only
and does not sound at remote user screens.
•
Screen Timers: Select time delay from drop-down lists:
–
Display Refresh Period
: The display will refresh with the latest data at this interval (seconds).
–
User Login Time Out
: How long the Monitor will wait with no operator input before logging the user
out. This only affects logged-in users, hence only administrators. Guest users do not log in and are not
affected.
Summary of Contents for PDI WaveStar Infinity 2
Page 4: ......
Page 78: ...P 16400110601 P 164001106 01...
