114
Eaton Power Xpert 9395 UPS Installation and Operation Manual 164201716—Rev 13
77..11..11
C
Coonnttrrooll P
Paanneell
The control panel is used to set up and control the UPS, and to monitor UPS operation. For a description of the
UPS control panel functions, see paragraph
or
Using the Color Touchscreen Control Panel
77..11..22
C
Ciirrccuuiitt B
Brreeaakkeerrss
Optional circuit breaker (CB1) is used to control the AC input to the UPS rectifier. CB1 is not available with the
separate UPM rectifier feed configuration.
77..22
U
Ussiinngg tthhee LLC
CD
D C
Coonnttrrooll P
Paanneell
The following paragraphs describe the UPS control panel, including controls and indicators, and how to monitor
UPS operation. The control panel (see
) is located on the front door of the UPS.
Figure 64. UPS Control Panel
3
1
2
PRESS ANY KEY TO CONTINUE
The control panel consists of:
•
A liquid crystal display (LCD) (
1
)
•
A horizontal row of pushbutton switches (
2
)
•
A vertical column of status indicators (
3
). See paragraph
.
The following paragraphs describe using the UPS control panel to monitor the UPS. See paragraph
for use of the operational controls.
When the unit powers up, the screen displays the Eaton logo as shown in
. To advance to the Main
Menu and Mimic screen, press any control panel pushbutton once.
