Eaton Power Xpert 9395 UPS Installation and Operation Manual 164201716—Rev 13
77
Figure 36. Distributed Bypass System CAN and Pull-Chain Simplified Interface Wiring
UPS 1
UPS 2
UPS 3
UPS 4
CAN
(If Installed)
(If Installed)
Pull Chain
NOTE
This drawing is for distributed bypass wiring purposes and is not a floor layout plan. UPSs can be placed in any physical order.
Figure 37. Distributed Bypass System UPS CAN Wiring without MOBs
Shielded Twisted Pair
Shielded Twisted Pair
Shielded Twisted Pair
UPS 1
CAN Bridge Card J3
UPS 2
CAN Bridge Card J3
UPS 3
CAN Bridge Card J3
(If Installed)
UPS 4
CAN Bridge Card J3
(If Installed)
NOTE
External CAN connections between UPSs require shielded twisted-pair wire.