Eaton
®
Power Xpert
®
9395P-900 Installation and Operation Manual 164000501—Rev 12
65
forklift or pallet jack forks from the right side of the pallet (facing the cabinet), between the supports on the
bottom of the pallet (see
to
for the ISBM and UPM section center of gravity
measurements). If the sections must be moved using the cabinet front or rear fork lift slots, see the
caution statements at the beginning of this procedure.
2.
Remove the three bolts securing the left side shipping bracket to the cabinet and three bolts securing the
bracket to the pallet (see
or
). Remove the left side shipping bracket.
3.
Remove the three bolts securing the right side shipping bracket to the cabinet and three bolts securing the
bracket to the pallet (see
or
). Remove the right side shipping bracket.
Figure 24. Removing the ISBM Section Left Side Shipping Bracket
Shipping Bracket
Bolts
Shipping Bracket
Bolts
Pallet
Left Side Shipping
Bracket
Front Door
