Eaton
®
Power Xpert
®
9395P-900 Installation and Operation Manual 164000501—Rev 12
69
4.
Remove the screws securing the corner channel and remove the channel (see
). Retain the
hardware for later use.
Figure 28. Section Joining
Left Top Panel
Left Middle Panel
Corner Channel
Interior Left
Side Panel
Wireway Panel
UPM Section
5.
Remove the screws securing the left top panel and remove the panel (see
). Retain the hardware
for later use.
6.
Remove the screws securing the left middle panel and remove the panel (see
). Retain the
hardware for later use.
Use care during installation to protect components mounted on the right side of the ISBM section and the
intercabinet wiring harnesses attached to the left side UPM section from damage.
