Eaton Power Xpert 9395P, Mechanical Installation Manual

5

2 Safety warnings

IMPORTANT SAFETY INSTRUCTIONS 
SAVE THESE INSTRUCTIONS

This manual contains important instructions that should be followed during installation of the Field 
Installed UPM (FI-UPM). Read all instructions before operating the equipment and save this manual for 
future reference.

The FI-UPM cabinet is designed for industrial or computer room applications, and contains safety 
shields behind the panel. However, the FI-UPM is a sophisticated power system and should be handled 
with appropriate care.

DANGER

The FI-UPM contains LETHAL VOLTAGES. All repairs and service should be performed by 
AUTHORIZED SERVICE PERSONNEL ONLY. There are NO USER SERVICEABLE PARTS inside the 
FI-UPM.

WARNING

•

The UPS system contains its own energy source (batteries). The output terminals may carry 
live voltage even when the UPS is disconnected from an AC source.

•

To reduce the risk of fire or electric shock, install this UPS and FI-UPM in a temperature and 
humidity controlled, indoor environment, free of conductive contaminants. Ambient 
temperature must not exceed 40°C. Do not operate near water or excessive humidity (95% 
maximum). The system is not intended for outdoor use.

•

Ensure all power is disconnected before performing installation or service.

•

ELECTRIC ENERGY HAZARD. Do not attempt to alter any battery wiring or connectors. 
Attempting to alter wiring can cause injury.

CAUTION

•

Keep the FI-UPM front panel installed to ensure proper cooling airflow and to protect 
personnel from dangerous voltages inside the unit.

•

Do not install or operate the UPS system or FI-UPM close to gas or electric heat sources.

•

The operating environment should be maintained within the parameters stated in this 
manual.

•

Keep surroundings uncluttered, clean, and free from excess moisture.

•

Observe all DANGER, CAUTION, and WARNING notices affixed to the inside and outside of 
the equipment.