Power Xpert Insight Gateway
Quick Start Guide
2
CAUTION
THE PXG900 CONTAINS A LITHIUM BATTERY. THERE IS A
RISK OF EXPLOSION IF THE BATTERY IS REPLACED BY AN
INCORRECT TYPE.
CHECK YOUR LOCAL AND STATE REGULATIONS FOR PROP
-
ER DISPOSAL OF LITHIUM BATTERIES.
PXG900 Kit Contents
Each kit contains the following components:
•
PXG900
•
USB A to Mini-B USB cable
•
DIN Rail Adapter and mounting screws (4)
•
Phoenix connectors (4)
Requirements for Installation
When you install a Power Xpert Gateway you should have the
following items available:
•
CAT 5 STP/UTP. A CAT 5 Ethernet LAN cable is for connecting
the PXG900 Ethernet LAN port to the Ethernet LAN system,
such as to a router or switch.
•
Twisted pair cabling for communications between the Mod
-
bus RTU and INCOM networks and the PXG900 communica
-
tions ports.
•
24 VDC Class 2 Power Supply.
Input Voltage, Nominal: 24 VDC; 0.3 A minimum
Output Voltage Range: +/- 10% Nominal
•
#2 Phillips Screwdriver - Required for the Phillips screws in
the DIN rail adapter mounting hardware kit.
•
Small Flathead Screwdriver - Required for the Phoenix wiring
connectors.
Requirements for Configuration
•
USB A to USB Mini-B cable, shipped with the gateway, for
device configuration. This attaches directly to a PC.
•
PC, running Windows 7, with an up-to-date copy of Chrome,
or Internet Explorer 10 or 11. You will need administrative
privilege on the PC as you must install a driver.
