INSTALLATION
Eaton 5130 Rack/Tower UPS (1000–3000 VA) User's Guide
S
164201730 Rev 4
www.eaton.com/powerquality
23
UPS Setup
The Eaton 5130 UPS is designed for flexible configurations and can be
installed in a rack or as a standalone cabinet.
If you are installing the UPS in a rack, continue to the following section,
“Rackmount Setup;” otherwise, continue to “Tower Setup” on page 25.
Rackmount Setup
The rail kit can be mounted in 19‐inch panel (48 cm) racks from 24 to
30 inches (61 to 76 cm) deep and includes:
S
Left and right sliding rail assemblies
S
(12) M5 washers
S
(12) M5
12 mm Phillips
®
-head screws
S
(8) M4
5 mm Phillips-head screws
S
(2) mounting brackets with handles
Required Tools
To assemble the components, a #2 Phillips screwdriver may be needed.