ISOLATED OUTPUT WIRING DIAGRAMS
EATON
Powerware
®
9170
+
UPS (3–18 kVA) User’s Guide
S
164201393 Rev C
www.powerware.com
55
Ground terminations, inside the UPS rear cover, are located directly
below the line input terminals. Figure 16 on page 27 shows input and
output wiring terminals inside the Powerware 9170
+
UPS cabinet.
If there is any question as to the need for this bond wire, contact your
local regulatory agency or your service representative.
N-G Bond Wire
X1
X3
X0
X2
Figure 38. N-G Bond Wire
