Eaton 9355 UPS (10/15 kVA) User's Guide
S
164201594 Rev D
www.eaton.com/powerquality
41
Chapter 6
Version 2 Wall-Mounted Bypass Switch
Installation
This chapter describes installing the wall-mounted bypass switch with
the UPS. The wall-mounted bypass switch is a Make-Before-Break
(MBB) maintenance bypass switch.
NOTE
The input isolation transformer cannot be used with the wall-mounted bypass
switch.
The Eaton 9355 UPS UPS has the following power connections:
S
3‐phase (L1, L2, and L3), neutral, and ground connection for
rectifier/bypass input
S
3‐phase (L1, L2, and L3), neutral, and ground connection for load
output
The nominal input/output voltages are:
S
120/208 or 127/220 Vac
Output overcurrent protection and disconnect switch must be provided
by others.
Figure 37 through Figure 39 beginning on page 53 show the oneline
diagrams.
Summary of Contents for Powerware 9355
