Powerware Power Protection Handbook for IBM 9910 International System i and System p Applications
28
E64 Technical Specifications*
Electrical Input
Nominal Voltage
208, 220, 230, and 240 Vac
Input Voltage Ranges
160–288V (without using batteries)
Frequency 50/60
Hz,
auto-sensing
Input Power Factor
>0.96 in any mode
Frequency Range
50 Hz: 47–53 Hz; 60 Hz: 57–63 Hz
Electrical Output
On Utility Voltage Regulation
±3% of nominal
On Battery Voltage Regulation
±3% of nominal
Efficiency
>85% online mode; >90% high-efficiency mode
Frequency Regulation
±3 Hz online; +1 Hz on battery; +3 Hz high-efficiency mode
Load Crest Factor
3 to 1 ratio
Communications
Communication Port
RS-232 communication port standard; optional X-Slot cards available
Communication Cable
Two (2) 6-ft communication cable included (DB-9 to DB-9 and RJ-45 to DB-9)
included
Battery
UPS Internal Battery Type
7 Ah, sealed, maintenance-free lead-acid
EBM Battery Type
9 Ah, sealed, maintenance-free lead-acid
Battery Type
Sealed, maintenance-free lead-acid
Battery Runtime
See Battery Runtime Chart
Battery Replacement
Hot-swappable UPS internal batteries and external batteries modules
Recharge Time
<2 hours from complete discharge
Start-On-Battery
Allows start of UPS without utility input
General
Topology
True online, double-conversion
Diagnostics
Full system self-test on power up
UPS Bypass
Automatic on overload or UPS failure
Dimensions and Weight
See Model Guide
Environmental and Safety
Ambient Operating Temperature
0°C to 40°C (32°F to 104°F)
Storage Temperature
0°C to 25°C (32°F to 77°F)
Relative Humidity
5% to 90% noncondensing
Heat Dissipation
2066 BTU/hr, maximum
Audible Noise
<45 dBA typical; <50 dBA (on battery)
REPO Port
Meets NEC code 645-11 intent and UL requirements
Safety Markings
UL, cUL, VDE, CE, NOM, NYCE, GS
EMC Compliance
FCC-A, VCCI-A, BSMI-A, C-Tick, CE Compliance
Surge Suppression
ANSI C62.41 Category B3, and EN61000-4-5 Level 3 Criteria B
* Due to continuing product improvement programs, specifications subject to change without notice.