UPS MAINTENANCE
EATON
Powerware
®
BladeUPS
®
(12 kVA) User's Guide
S
164201649 Rev 3
www.powerware.com
106
C A U T I O N
S
The UPS internal batteries are heavy (see page 114). Each battery tray holds two rows of
five batteries. Use caution when handling the heavy battery trays.
S
Pull the battery trays out onto a flat, stable surface. The battery trays are unsupported
when you pull them out of the UPS.
4.
Untuck the plastic handle at the end of a battery tray. Pull the
handle firmly to remove the tray. Use both hands to support the
tray as it leaves the UPS cabinet.
Repeat for each battery tray. See “Recycling the Used Battery or
UPS” on page 112 for proper disposal.
5.
Slide the new battery trays into the cabinet (see Figure 54). Verify
each tray is properly aligned before sliding the tray in.
When a tray is fully installed, tuck the plastic handle on the end of
the tray into place.
Figure 54. Installing the UPS Battery Trays
