CONFIGURATION
EATON
Powerware
®
Environmental Rack Monitor (ERM) User’s Guide
S
164201673 Rev 1
20
+============================================================================+
|
IP Address
Community String
Access
|
+============================================================================+
[1] 0.0.0.0
*
NotAccess
[2] 0.0.0.0
*
NotAccess
[3] 0.0.0.0
*
NotAccess
[4] 0.0.0.0
*
NotAccess
[5] 0.0.0.0
*
NotAccess
[6] 0.0.0.0
*
NotAccess
[7] 0.0.0.0
*
NotAccess
[8] 0.0.0.0
*
NotAccess
COMMANDS -
1. Modify - Modify an entry of table
2. Reset - Reset an entry to default from table
0. Return to previous menu
Please Enter Your Choice => _
Figure 17. Access Control Table
Set Trap Receivers
If you want to use a PC and perform the SNMP manager ‘trap’ function
in order to manage the TH-Module through the ERM, the IP address of
the PC must be added to the ERM list.
1.
Type
4
on the Main Menu to display the Trap Receiver Table screen
(see Figure 17).
2.
Type
1
on the Trap Receiver Table screen to modify an entry in the
Access Control Table.
3.
Type
2
on the Trap Receiver Table screen to reset an entry to the
default setting.
4.
Type
0
to return to the Main Menu.
NOTE
The Set Trap Receivers configuration is used only for SNMP Network Manager.
