EATON
Powerware
®
Environmental Rack Monitor (ERM) User’s Guide
S
164201673 Rev 1
26
Chapter 4
ERM Management
You can manage the ERM from a Web browser or from an SNMP
network management system.
NOTE
The IP address of the PC must be entered in the ERM Access Control Table to
prevent unauthorized users from configuring the ERM via HTTP or SNMP protocols.
NOTE
If you do not add the IP address of the workstation to the Access Control Table (via
RS-232 or Telnet) or the SNMP/HTTP Access Control (via Web Browser) in the ERM, you can
only view the in TH-Module status; it will not be able to perform any configuration on the
ERM/TH-Module.
ERM Home Page
1.
Start the Web Browser and enter the ERM IP address.
2.
The ERM home page displays on the screen.
3.
Click the Help button at the bottom of each page for a detailed
description of each item.
ERM Monitoring
The main menu contains all the measurements and data read from the
ERM.
All the sub-menus are read-only for all users; write-mode access is not
allowed.
