Eaton Powerware Series, Quick Start Instructions

Figure 13. 

Install NetWatch Software

Figure 14. 

Launch NetWatch Software

Figure 15. 

Enter ConnectUPS Card IP Address

Figure 16. 

Select UPS Load Segment

Eaton

®

 ConnectUPS

t

 Web/SNMP Card (X and BD Models) Quick Start Instructions 164950185Rev B

www.eaton.com/powerquality

8

Section 4

Install Shutdown Software

NOTE  

The following procedure applies to NetWatch shutdown

software for Microsoft Windows operating systems. For other
operating systems, refer to the NetWatch help file on the CD.

NOTE  

For other software, such as LanSafe

R

 Power

Management Software or PowerVision

R

 Software, refer to those

user guides for instructions.

Use the following procedure to install NetWatch software after
you have installed and configured the card:

1.

Insert the Software Suite CD into the computer's CD-ROM
drive. The CD menu displays after a few seconds.

2.

Select 

Software Wizard

 from the Main Menu.

3.

Select 

Install NetWatch

 (see Figure 13).

4.

Select the operating system.

5.

Select 

Launch the Installer

 (see Figure 14).

6.

Select 

Open

 in the File Download dialog box and follow the

installation instructions until the Select Powerware Shutdown
Server window displays.

7.

Select 

Manually Enter IP Address for the Shutdown Server

(see Figure 15).

8.

Type the IP Address of the card and select 

OK

.

9.

Select the correct UPS load segment that your computer's
power cord is plugged into and select 

OK

 (see Figure 16).