8
Instruction Booklet
IB150020EN
Effective June 2019
PXG950-4G installation manual
EATON
www.eaton.com
4 . Place the PXG950-4G on the DIN rail at an angle, and then pull
the PXG950-4G down to compress the springs at the top of the
DIN-rail mounting bracket .
5 . Push the PXG950-4G towards the DIN-rail to secure the lower
clip of the bracket onto the DIN rail .
Mounting the PXG950-4G using the perpendicular mount
The perpendicular mount is designed for mounting in a DIN-rail
only . An open space of 63 .50 mm (2 .50 in) around the PXG950-4G
is recommended for optimal air circulation . Ensure that the environ-
mental temperature in which the PXG950-4G is installed does not
exceed the operating temperature of the PXG950-4G .
For more information about the operating temperature of the
PXG950-4G, see the PXG950-4G Specifications .
1 . Align the screw holes on the perpendicular-mount bracket with
the screw holes on the PXG950-4G .
2 . Tighten the four M-4x7 screws to secure the PXG950-4G to
the perpendicular-mount bracket . Torque the screws at 8±0 .5
kilograms-centimeter (17 .64±1 .1 pounds-inch) .
