3
Instruction Leaflet
IL150009EN
Effective December 2019
EATON
www.eaton.com
Run meter wiring through the holes drilled previously. Wire the
meter according to the instructions in the meter installation guide.
Push the top of the meter onto the DIN rail.
Swing panel cover can be attached using the enclosed hardware.
Close the hinged lid and secure the clasp to close.
Screws are provided to secure the hinged lid. Local codes may
require this step to prevent opening by unauthorized persons if a
locking mechanism is not used. For added security, the installer may
also add a locking mechanism.
Optional:
Use
included hardware
to secure the
hinged lid at all
four corners.
Optional:
Attach a
locking mechanism
here (not included).
