Eaton Rack Power Module
164201675—Rev 02
7
22..66
W
Waallllm
moouunntt IInnssttaallllaattiioonn
To install the RPM-3U/3Ui on a wall:
1.
Obtain the appropriate number and type of mounting fasteners for the type of wall and the weight of the
RPM-3U/3Ui, any installed options, and power cords. This hardware is not included with the RPM-3U/3Ui.
See “
” for weights.
2.
Locate an area on the wall suitable for mounting the RPM-3U/3Ui. See
to mark the locations on
the wall for the customer-supplied mounting fasteners.
NOTE
The wallmount brackets and the RPM-3U/3Ui must be installed so that the breakers
face
LEFT or RIGHT. For proper functioning, the breakers must NOT face up or down.
Figure 2. Wallmount Installation (Hardwired Unit Shown)
M4 Flat-Head Screws (4 places)
M4 Pan-Head
Screws (8 places)
40.6 cm (16”)
50.8 cm (20”)
Cable Tray
(optional)
Vertical dimension for
customer-supplied
mounting fasteners
Horizontal dimension for
customer-supplied
mounting fasteners
Keyhole Slots
(4 places)
3.
Secure the two wallmount brackets to the RPM-3U/3Ui with the supplied eight M4 pan-head screws (see
4.
(Optional) Secure the cable tray to the wallmount brackets with the supplied four M4 flat-head screws (see
5.
Install two customer-supplied mounting fasteners for the top keyhole slots into the wall (do not tighten).
6.
Place the RPM-3U/3Ui on the wall, and adjust the placement so that the fasteners mounted on the wall
move into the small ends of the keyhole slots.
Verify the RPM-3U/3Ui is firmly flush against the wall, then tighten the two mounting fasteners.
7.
Secure the RPM-3U/3Ui to the wall with the remaining customer-supplied mounting fasteners.
Summary of Contents for RPM-3U
