background image

27

External Battery Cabinets

Chapter 7     Product Specifications

The following sections detail the battery specifications, battery runtimes, and the environmental and safety 
specifications for the EBC.

This section provides the following specifications:

• 

Model Numbers

• 

Battery specifications

• 

Battery runtimes

• 

Environmental and safety specifications

7 .1 

Specifications

operating Temperature

5°C –  40°C 

Storage Temperature

-25°C to 55°C 

Transit temperature

-25°C to 60°C 

humidity

5 % to 95 % maximum noncondensing

Enclosure Class per IEC 60529

IP21 with door opened

rohS/WEEE

Required

operating Altitude

Maximum 1000m at 30°C without derating   

7 .1 .1    Environmental  

specifications

 

The recommended operational, storage and transit temperature with CSB and C&D batteries is 

generally max. 25°C. Please refer to the battery manufacturer’s recommendations for accurate 
temperatures.

 

Altitude-thermal de-rating as per EN62040-3:2011.

Battery type

VRLA, 12 VDC

Battery quantity

93PM 30-50 kW units:
      1) 36 blocks, 216 cells per battery string, 2V per cell.
      2) 40 Blocks, 240 cells per battery string.
93PM 80-200 kW units:
      1) 36 blocks, 216 cells per battery string, or
      2) 40 blocks, 240 cells per battery string, 2V per cell.
93E 80-200 kVA units:
      1) 36 blocks, 216 cells per battery string, or
      2) 38 blocks, 228 cells per battery string, or
      3) 40 blocks, 240 cells per battery string, 2V per cell.

note! Battery strings with different battery quantity and
voltage must not be connected in parallel!

Battery Voltage

432 V (36 blocks) or 456V (38 blocks) or 480 V (40 blocks)

7 .1 .2    Battery 

specifications

Summary of Contents for Single EBC





































Reviews: