2
External Battery Cabinets
Line-up-and-match battery cabinets are installed adjacent to the UPS. The battery cabinets can be placed either
on the left side or right side of the UPS.
See Figure 1-2 for line-up-and-match configuration views.
1 .2
model Configurations
1 .3
Using This manual
This manual describes how to install the EBC and is divided into chapters. Read and understand the
procedures described to ensure trouble-free installation and operation.
Read through each procedure before beginning the procedure. Perform only those procedures that apply to
the UPS system being installed or operated.
The following model configurations are available, Use CSB HRL and C&D MRX batteries for dimension
reference:
•
Single EBC:
A single cabinet, fitted with battery circuit breaker and 5 trays, shall house 40 batteries of 200-320W/
Cell rating.
•
Double EBC:
Two cabinets (for separate shipping and re-joining at final site), one of them fitted with circuit breaker
and both fitted with 4 trays, shall house up to 40 batteries of 330W-620W/Cell.
1 .4
Conventions Used in This manual
This manual uses these type conventions:
•
Bold type highlights important concepts in discussions, key terms in procedures, and menu options, or
represents a command or option that you type or enter at a prompt.
•
Italic type highlights notes and new terms where they are defined.
•
Screen type represents information that appears on the screen or LCD.
figure 1-2 . EBC and UPS Cabinet
UPS Cabinet
UPS Cabinet
Single EBC
Double EBC
Summary of Contents for Single EBC
