background image

Eaton

1000 Eaton Boulevard

Cleveland, OH 44122

United States

Eaton.com

© 2018 Eaton

All Rights Reserved

Printed in USA

Publication No. IB158002EN / TBG 001099

October 2018

Eaton is a registered trademark.

All other trademarks are property  

of their respective owners.

Instruction Booklet 

IB158002EN

Effective October 2018

Eaton SPD Max Series 

Surge Protective Device 

  

7.0 Warranty

Eaton warrants these products for a period of 15 years from the 

date of delivery to the purchaser, 20 years if the product is properly 

registered with Eaton, to be free from defects in both workmanship 

and materials. To register a SPD MAX with Eaton please go to www.

eaton.com/spd and click on the SPM Series Product Registration link 

on the SPD MAX page. Eaton assumes no risk or liability for results 

of the use of the products purchased from it, including but without 

limiting the generality of the foregoing: (1) The use in combination 

with any electrical or electronic components, circuits, systems, 

assemblies, or any other materials or substances; (2) Unsuitability of 

any product for use in any circuit or assembly.
Purchaser’s rights under the warranty shall consist solely of requir-

ing Eaton to repair, or at Eaton’s sole discretion, replace, free of 

charge, F.O.B. factory, and defective items received at said factory 

within said term determined by Eaton to be defective. The giving of 

or failure to give any advice or recommendations by Eaton shall not 

constitute any warranty by or impose any liability upon Eaton. The 

foregoing constitutes the sole and exclusive liability of Eaton AND 

IS IN LIEU OF ANY AND ALL OTHER WARRANTIES EXPRESSED, 

IMPLIED OR STATUTORY AS TO THE MERCHANTABILITY, FITNESS 

FOR PURPOSE SOLD, DESCRIPTION, QUALITY, PRODUCTIVENESS 

OR ANY OTHER MATTER.
In no event shall Eaton be liable for special or consequential dam- 

ages or for delay in performance of the warranty.
This warranty does not apply if the product has been misused, 

abused, altered, tampered with, or used in applications other than 

specified on the nameplate. At the end of the warranty period, Eaton 

shall be under no further warranty obligation expressed or implied.
The product covered by this warranty certificate can only be repaired 

or replaced by the factory. For help on troubleshooting the SPD, or 

for warranty information, call 1-800-809-2772, Option 4, sub-option 

2. Repair or replacement units will be returned collect. If Eaton finds 

the return to be a manufacturer’s defect, the product will be returned 

prepaid.
Specifications contained herein are subject to change without 

Notice. 

EATON CORPORATION - CONFIDENTIAL AND PROPRIETARY 

NOTICE TO PERSONS RECEIVING THIS DOCUMENT AND/OR 

TECHNICAL INFORMATION IN THIS DOCUMENT, INCLUDING 

THE DRAWING AND INFORMATION CONTAINED THEREON, IS 

CONFIDENTIAL AND IS THE EXCLUSIVE PROPERTY OF EATON 

CORPORATION, AND IS MERELY ON LOAN AND SUBJECT 

TO RECALL BY EATON AT ANY TIME. BY TAKING POSSESSION 

OF THIS DOCUMENT, THE RECIPIENT ACKNOWLEDGES AND 

AGREES THAT THIS DOCUMENT CANNOT BE USED IN ANY 

MANNER ADVERSE TO THE INTERESTS OF EATON, AND THAT NO 

PORTION OF THIS DOCUMENT MAY BE COPIED OR OTHERWISE 

REPRODUCED WITHOUT THE PRIOR WRITTEN CONSENT 

OF EATON. IN THE CASE OF CONFLICTING CONTRACTUAL 

PROVISIONS, THIS NOTICE SHALL GOVERN THE STATUS OF THIS 

DOCUMENT.

DISCLAIMER OF WARRANTIES AND LIMITATION OF LIABILITY

The information, recommendations, descriptions and safety nota-

tions in this document are based on Eaton Corporation’s (“Eaton”) 

experience and judgment and may not cover all contingencies.

If further information is required, an Eaton sales office should be 

consulted. Sale of the product shown in this literature is subject 

to the terms and conditions outlined in appropriate Eaton selling 

policies or other contractual agreement between Eaton and the 

purchaser. THERE ARE NO UNDERSTANDINGS, AGREEMENTS, 

WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING 

WARRANTIES OF FITNESS FOR A PARTICULAR PURPOSE OR 

MERCHANTABILITY, OTHER THAN THOSE SPECIFICALLY SET OUT 

IN ANY EXISTING CONTRACT BETWEEN THE PARTIES. ANY SUCH 

CONTRACT STATES THE ENTIRE OBLIGATION OF EATON. THE 

CONTENTS OF THIS DOCUMENT SHALL NOT BECOME PART OF 

OR MODIFY ANY CONTRACT BETWEEN THE PARTIES.

In no event will Eaton be responsible to the purchaser or user in 

contract, in tort (including negligence), strict liability or otherwise 

for any special, indirect, incidental or consequential damage or loss 

whatsoever, including but not limited to damage or loss of use of 

equipment, plant or power system, cost of capital, loss of power, 

additional expenses in the use of existing power facilities, or claims 

against the purchaser or user by its customers resulting from the 

use of the information, recommendations and descriptions contained 

herein.

Summary of Contents for SPD Series

















Reviews: