19
www.eaton.com/wireless
call toll free: 1-800-663-8806
DM-R260-0056A R1
Light Legend
Solid
Slow
Flash
Fast
Flash
Red
Solid
Green
Solid
Red & Green
Alternating
Yellow
Solid
A.
Service Mode: Pair WSO (continued)
3. Start Pairing
A. Press
[ENTER]
on the TD3100 to start the
pairing process.
The pairing will start and the TD3100 screen
will display the pairing progress as shown on
the right
.
B.
NOTE:
If the pairing fails the TD3100 will display an error screen with the reason for failure or the WSO link
light with be red. Correct the error, power cycle the RCU and Base Station, and then repeat the
pairing process.
If repeated attempts at pairing fails, contact your service representative for assistance as there may
be a setup or hardware failure.
B. Pairing is complete when
1. TD3100 displays the success screen as
shown on right
.
2. WSO
Link
light will turn off
.
Link:
off