background image

 

36 

www.eaton.com/wireless

 

call toll free: 1-800-663-8806

 

DM-R260-0056A R1 

 

Eaton Part Number 

Description 

ASSY-3834-01 

Battery pack, Non-rechargeable 

ASSY-3834-02 Battery 

pack, Rechargeable 

ASSY-3849-01 

Battery Charger 

ASSY-3933-01 Charge 

Cradle 

ASSY-3933-02 

TD3100 mount & detect switch 

ACAB-3681-01 

Tether cable, 10 meters 

ACAB-3681-02 

Tether cable, 30 meters 

ACAB-3681-03 

Tether cable, 15 meters 

ACAB-3679-01  

TD charge cable, 12/24VDC,auto pwr plug  

ACAB-3680-01  

TD charge cable, 120/240VAC  

FMEC-2709-01 

Shoulder strap 

FMEC-1248-02 Waist 

belt 

 

R260 Base Station 

TD3100 RCU 

Size 

5.1” x 4.7” x 1.4” 

(130mm x 119mm x 36mm) 

7.7" x 9.0" x 6.2" (196mm x 229mm x 158mm) 

Weight 

0.65lbs (0.295kg) 

3.5 lbs (1.59kg) incl. batteries 

Construction 

High impact plastic, weatherproof 

Industrially robust, hardened plastic, chemical resistant 

Input Power 

+9V to +30VDC 

4 x AA batteries (alkaline or rechargeable Lithium Ion)  

Battery Life 

N/A 

14 hours (with lithium ion battery) 

Operating  

Temperature Range 

-40ºF to +158ºF (-40ºC to +70ºC) 

 -22ºF to +136ºF  (-30ºC to +58ºC)   

Outputs 

3A (max) each (sourcing), 

10A (max) each (combined)  

N/A 

Antenna 

Internal or external 

Internal 

Approvals 

USA

- FCC part 15.247  

Canada

- IC RSS 210 Issue 6, Sept. 2005 

Storage 

Temperature Range 

-58

˚

F to +185

˚

F (-50

˚

C to +85

˚

C) 

 -40ºF to +140ºF  (-40ºC to +60ºC)  with lithium ion battery 

(refer to manufacturer specifications for alkaline battery) 

Charging 

Temperature Range 

N/A 

 +32ºF to +113ºF  (0ºC to +45ºC)   

Parts & Accessories

 

 

 

Specifications

 

Warranty 

 

EATON, Controls and Power Conversion Division, Wireless Solutions, warrants 

to the original purchaser that the Eaton Wireless products are free from defects 

in materials and workmanship under normal use and service for a period of ONE 

YEAR, parts (EXCLUDING: SWITCHES, CRYSTALS, OR PARTS SUBJECT 

TO UNAUTHORIZED REPAIR OR MODIFICATION) and labor from the date of 

delivery as evidenced by a copy of the receipt. EATON entire liability and your 

exclusive remedy shall be, at EATON's option, either the (a) repair or (b) re-

placement of the EATON Wireless product which is returned within the warranty 

period to EATON Wireless freight collect by the EATON APPROVED carrier with 

a copy of the purchase receipt and with the return authorization of EATON Wire-

less. If failure has resulted from accident, abuse or misapplication, EATON shall 

have no responsibility to repair or replace the product under warranty. In no 

event shall EATON be responsible for incidental or consequential damage 

caused by defects in its products, whether such damage occurs or is discovered 

before or after replacement or repair and whether or not such damage is caused 

by the negligence of EATON.

 

FCC Rules and Compliance 

 

This device complies with Part 15 

of the FCC Rules.  Operation is 

subject to the following two condi-

tions:  

(1) This device may not cause 

harmful interference, and  

(2)  this device must accept any 

interference received, includ-

ing interference that may 

cause undesired operation. 

 

FCC Part 

15.247 

 

ISC 

RSS 210 Issue 6,  Sept. 

2005  

 

EATON 

eMobility Division 

 

Mobile Wireless Control 

Solutions 

 

74-1833 Coast Meridian Road 
Port Coquitlam, BC, Canada 
V3C 6G5 

 

Tel: 604-944-9247 
Fax: 604-944-9267 

 

Toll Free: 1-800-663-8806 

 

www.eaton.com/wireless 

Summary of Contents for TD3100





































Reviews: