94
8 Operating
Mounting and Operating Instructions CEAG Central Battery System ZB-S 40071860179 (L) November 2018 www.ceag.de
8.4.7 Menu 7 “Logbooksetup”
<ok>
Menu 7.1:
Select the log book entries with
–
Line 1: displays date and time for the
displayed event
– Line 2: displays a message about the
nature of the event, e.g. “Luminaire
fault” with additional information in
lines 3 and 4
– A message is displayed if the opera-
tor gets to the end or back to the
beginning of the log book entries as
he scrolls through them.
Finish and return to Menu 7 with
<Menu>
<ok>
Menu 7.2:
Clear log book?
Menu=No OK=YES
<Menu>:
No deletion
and return to
menu 7 “Memory card”
<Enter>:
All log book entries on the
memory card are deleted!
Return to menu 7 “Memory card”
<ok>
Menu 7.3:
Save configuration?
Menu=No OK=YES
<Menu>:
No saving
and return to
menu 7 “Memory card”
<Enter>:
All entries on the memory
card are deleted and overwritten
with the current system configu-
ration!
Return to menu 7 “Memory card”
<ok>
Menu 7.4:
Load configuration?
Menu=No OK=YES
<Menu>:
The existing system con-
figuration is retained
and return to
menu 7 “Memory card”
<Enter>:
The existing system con-
figuration is overwritten with the
entries on the memory card!
The system is now rebooted .
Return to main screen
8.4.8 Menu 8 “Send ServicePinMsg”
<ok> starts the function (direct from the main menu)
<Menu> / <ESC> returns to the main menu
This function is provided for service engineers and has no
relevance for normal operation.
Overview:
Main menu
Test & status menu
Block & reset alarms
Basic settings
DLS/TLS Setup
Circuit setup
Luminaire setup
Logbooksetup
Send ServicePinMsg
Menu 7
Search logbook
Erase logbook
Save configuration
Lead configuration
Menu 8
Function is start-
ed direct from
the main menu by
pressing <ok>
Selection of
menu options
with the
keys
<ok>:
confirm selec-
tion
<Menu>: can-
cel and return
to the previous
menu (any
changes en-
tered are saved)
<ESC>: cancel
and return to
the previous
menu (any
changes en-
tered are not
saved)
flashing input
prompt
Search logbook
Erase logbook
Save configuration
Lead configuration
Search logbook
Erase logbook
Save configuration
Lead configuration
Search logbook
Erase logbook
Save configuration
Lead configuration
Important NOTE
Once deleted, log book entries can-
not be restored.
Important NOTE
The current configuration is ir-
revocably overwritten with the new
configuration!
Search logbook
Erase logbook
Save configuration
Lead configuration
11.05.12 12:30:00
Event
Line 3
Line 4
Line 3 and 4 may show additional informa-
tion about the event displayed in line 2:
For a luminaire fault with CG monitoring,
e.g.:
Line 3: “Circuit No.”
Line 4: Address(es) of the faulty luminaire(s):
--------------------
In the example illustrated, luminaires 6, 13
and 14 have a fault – luminaires 3, 10 and
16 to 20 are not installed.
