5
Mounting and Operating Instructions Fire-Resistant Cabinet Type US-S ESF30
40071860245 (B) February 2020 www.ceag.de
2 Safety
been trained in possible hazards that may occur. A qualified
person is anyone who, based on his/her training, expertise
and experience as well as his/her knowledge of the relevant
provisions, is able to assess the work that he/she has been
given and to identify any potential hazards.
2.6 Work safety
Following the safety information and instructions provided in
this operating manual is essential to avoid bodily injuries and
property damage while working on and with the equipment.
instructions before commencing work on the equipment.
This also applies if the person concerned has worked with
the same or similar equipment in the past or was trained by
the manufacturer.
2.3 Changes and alterations to the equip-
ment
In order to avoid hazards and to ensure the best possible
performance, no modifications, retrofits and add-ons are
permitted on the equipment unless these were expressly
approved by the manufacturer.
2.4 Responsibility of the operating entity
These operating instructions must be kept in the direct
vicinity of the equipment and must always be accessible to
people working on or with the equipment. The equipment
must only be operated if it is in an exemplary and operationally
safe condition. The equipment must be checked every time
before it is put into operation. The operating instructions as
set out in the manual must be complied with in full!
2.5 Personnel requirements
Only authorised and qualified personnel may carry out
work on or with the device. These personnel must have
Tabelle 1: Technical Data
Type
US-S ESF30
28-P
US-S ESF30
13-P
US-S ESF30
SOU5
US-S ESF30
SOU3
US-S ESF30
SOU2
US-S ESF30
SOU1
Approvals / Certificates
DIBT
DIBT
VDE
VDE
VDE
VDE
Fire exposure from out-
side (min)
30
30
30
30
30
30
Enclosure specifications
Enclosure
Fibre plates
Fibre plates
External fibre
plates / Internal
plastic
External fibre
plates / Internal
plastic
External fibre
plates / Internal
plastic
External fibre
plates / Internal
plastic
Protection rating
IP42
IP42
IP65
IP65
IP65
IP65
Protection class
l
l
l
l
l
I
Dimensions
(W x H x D in mm)
2064 x 914 x 604
1198 x 898 x 449
1140 x 400 x 230
840 x 400 x 230
690 x 400 x 230
535 x 396 x 230
Weight (kg) empty cabinet 330
187
81
61
51
35
Closure
Sash fastener
Sash fastener
Sash fastener
Sash fastener
Sash fastener
Sash fastener
Electronic specifications
Rated voltage
400 V 50 Hz
230 V 50 Hz
230 V 50 Hz
230 V 50 Hz
230 V 50 Hz
230 V 50 Hz
Number of module slots
30
13
5
3
2
1
Max. conductor size /
final circuits (mm²)
4
4
4
4
4
4
Max. conductor size (mm²) 35
35
10
10
10
10
Max. total conductor
size (mm²)
775
625
89
79
74
39
3 Technical Data
