7
InstALLAtIon And opErAtIon MAnUAL
25-13400-C May 2019 www.eaton.com
4. Mounting VoCALL 5
4. Mounting VoCALL 5
Before mounting the VoCALL 5 on the wall it is advisable to remove
the cable knockouts.
Unused knockouts must be left unopened to comply with the Low Voltage Directive
(LVD), accidentally knocked out holes should be blanked off.
4.1 Surface Mount (EFVCC5)
When mounting the surface mount version to the wall ensure the unit sits flat on
the wall and is secured via the keyed embossed sections in the rear of the back box.
Ensure the unit is secure to wall with sufficient fixings to hold the unit
and its batteries.
Figure 2. surface mounting VoCALL 5
Mounting Holes
Mounting Holes
190mm
150mm
237mm