RF-components
19
ABX3
RF-remote control device
Product description
Very simple radio frequency remote control device with
which lighting and electrical appliances can be switched
from a distance. With this device, individual lamps can
be switched and dimmed and groups of lighting can be
operated from a central point. Which buttons operate
which lamps can be written down on the label affixed to
the device.
Characteristics
•
Neatly arranged and easy to operate
•
Labels for this remote control device can be made
manually or digitally via website www.xanura.nl
•
Is provided with a number of standard Xanura
group commands
•
Can operate the Xanura alarm unit
•
Range 30 metres in open space
ABX1
universal remote control device
Product description
The ABX1 is a universal remote control device with
which both lighting and electrical appliances can
be switched. The RF signals (radio frequency),
that travel through walls and ceilings without any
difficulty, operate the typical Xanura applications,
whilst the other applications such as TV and audio are
operated via IR signals (infrared). The remote control
device can not only be used to switch or dim individual
lamps, but also to centrally switch large groups
of lighting as well.
Characteristics
•
Both radio frequency (Xanura) and infrared
operation (e.g. SAT, AUDIO, TV, VIDEO)
•
One single remote control device with a variety
of functions for various electrical appliances
•
Easy to use
•
The most common types of appliance are already
pre-programmed in the device
•
Self-programming for appliances that are not
programmed
•
Provides a number of standard group commands
•
Range 30 metres in open space
CAX
(RF-Communication access interface)
Product description
The CAX is a combination of a RF interface with phone call
facilities. By connecting the CAX to the telephone network,
it is possible to phone in with it. In this way, individual
lights and/or preset scenarios can be
activated with a (mobile) telephone. The CAX
operation panel can be used to switch or dim
individual lights or groups of lights.
Characteristics
•
Can be used functionally as a RF interface
•
Individual addresses or group commands can be sent
•
Is easy to install without installation work
•
Has phone-in facilities
RIX
RF-interface
Product description
The RF interface is an adaptor that transposes the
signals from RF remote control devices and RF
movement detectors (BSX1) into Xanura commands.
With the RIX, it is possible to operate the Xanura
installation from a distance, without the use of wiring.
The RF interface can be connected to any wall socket in
the home that is permanently energized.
Characteristics
•
Enables the Xanura system to be operated
by remote control
•
Is simple to install without any installation work
•
Is also provided with a built-in actuator
•
16 addresses with one RF interface can be served
RF-components
By applying radio frequency Xanura components, it is possible to operate Xanura installations by remote control.
A special characteristic of the RF components is that the signals can easily travel through walls and ceilings,
so that the sender and receiver do not need to be in the same room. The most important RF components are
mentioned below.
