English
Quick start guide
1) Put the batteries in
1. Open the cover on the back of the 8 in 1 Universal
Remote Control
2. Insert 2 batteries (AAA alkaline). Make sure the batteries
are
NEW
.
2) Program your 8 in 1 Universal Remote Control
1. Turn on the equipment that you wish to control (TV, VCR,
etc).
2. The AUX key allows you to program and control any
equipment such as TV, VCR, Dx
3. Take the code book supplied with the 8 in 1 Universal
Remote Control and find the brand of the equipment you
wish to control. E.g. if you have a Thomson TV look for
Thomson under the TV section.
4. Press and hold on the key marked
SETUP
(8) until the
LED (2) stays permanently on. This takes about 3 seconds.
Release the
SETUP
key.
5. Press and release the TV, VCR, CBL, DVD, etc. in
accordance with the appliance you wish to control.
6. From the code book take the first number corresponding
to your equipment and enter the number by pressing the 0-9
key pad (9). Each time you press a key the red LED (2) will
flash.
7. If the number is correctly entered the LED will turn off. If
the number is incorrect then the LED will flash fast. If
incorrect you will need to restart at 4.
Press the
X
POWER
key (1) . If your equipment switches off
you have found the right code. If it does not switch off, you
will need to restart from 4.
Sometimes there are several codes that have similar
features. If you find that your 8 in 1 Universal Remote
Control does not work for some functions, you may need to
try another code.
20
MBO 1991494G01 001
1. Introduction
The XanuraHome remote control is designed to control up to
8 devices: TV, VCR, CBL (decoder, set top box), DVD, CD,
SAT (satellite receiver), or any other device. The XanuraHome
remote contains a library of codes that are preprogrammed
into the remote control. This library covers nearly all the audio
video products on the market today. The codes have to be
programmed once before use. This can be done in different
ways:
a. Manual entry of one of the codes displayed under the
related brand and type of equipment in the attached code
book (see 4.1)
b. Automatic code search for some well-known brands (4.2)
c. Automatic code search for all brands (4.3)
d. Manual search through all codes (4.4)
XanuraHome Automation:
control all electrical appliances
with one remote control
The XanuraHome Remote has two transmitters: an infrared
(IR) transmitter and a radio frequency (RF) transmitter. This
allows you to operate practically anything. You can operate
your TV, video etc. with the infrared (IR) technology. The
XanuraHome radio frequency (RF) technology makes it
possible to operate lights and appliances from anywhere in
the home.
Here are some examples of the uses of the XanuraHome
Automation feature:
•
Dim the lights and switch them on and off while
watching TV.
•
Turn the coffee machine on from your bedroom when you
wake up in the morning.
•
Turn your lights on at night to scare off intruders when
you hear noises.
•
Switch on your electric blanket before the movie ends, so
you can enjoy a warm bed once the movie is finished.
•
Switch everything off with a single press of a button
when you go to bed.
2. Insert the batteries (always use new AAA alkaline
batteries).
1. Open the cover on the back of the XanuraHome Remote.
2. Insert 2 AAA alkaline batteries, verify that they are placed
correctly with the + on the battery in the same position as
marked inside the battery compartment.
3. Close the battery compartment carefully.
21
MBO 1991494G01 001
